Very thin sheets of metal 4

[vidiii]

Hi,

I'm working on a project where very thin metal plates are needed to obtain the optimal results. The sheets of metal must be as thin as possible.

Does somebody know a company that can deliver extremely thin sheets of metals (stainless steel, aluminium, phosphor bronze, brass). The sheets must be as thin as possible. 30um (micro meter) to 90um. (um = 1e-6m)

Until know I haven't found a company that can deliver those products, because the thickness is too small.

I sincerely hope somebody can help me. Thanks in advance.

Kindest regards,
Vidi

 

[MikeHalloran]

How many squre miles of each do you need?



Mike Halloran
Pembroke Pines, FL, USA

 

[Yallapragada1022]

You can contact Precision Steel Warehouse at (847) 455 7000.

http://www.precisionsteel.com/

Hope this helps.

Rao Yallapragada

 

[unclesyd]

If your are looking at really thin you should check out the following companies.

Both companies have give me very good service.

Thin

http://www.allfoils.com/products-

Thinnest

http://www.hpmetals.com/

 

[vidiii]

Thanks very much for the very valuable posts!

 

[vidiii]

MikeHalloran: +- 1 cubic meter. It's for a project for designing a prototype.

 

[kenvlach]

For small quantities in assorted materials,

http://www.mcmaster.com

Just type foil

Al-1100 13, 15, 18, 25,51, 76 & 102 [μ]m
brass (Alloy 260) 25, 51 [μ]m
copper 25, 51, 76 & 102 [μ]m
nickel 25, 51, 76 & 102 [μ]m
stainless (304, 309 & 321) 51 [μ]m

Adhesive-backed is available, too.

 

[EdStainless]

And two more, one on each side of the pond.

http://www.alleghenytechnologies.com/ludlum/pages/facilities/newbedford.asp

(formerly known as Teledyne Rodney)

http://www.outokumpu.com/pages/Page____5480.aspx?epslanguage=EN

An I also recall Engineered Metals in MA, I believe that the web is

http://www.cladit.com

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm