HI, I would like to ask, if anybody knows whether any database of material hardness (Vickers HV20 particularly) exist. In the norm describing the testing procedure is not given any information about this. Construction steel (TS = 450-650MPa)is the main focus. Thanks a lot. Nice day!
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Vickers hardness database for steels?
- Thread starter aniiie
- Start date
aniiie;
Basically what you are asking is the following, what is the acceptable range of hardness for construction steels having an ultimate tensile strength range of 450-650 MPa.
Try searching the internet for hardness to ultimate tensile strength conversion for steels.
Basically what you are asking is the following, what is the acceptable range of hardness for construction steels having an ultimate tensile strength range of 450-650 MPa.
Try searching the internet for hardness to ultimate tensile strength conversion for steels.
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question
- Question
