Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

View glass for boiler flame inspection

Status
Not open for further replies.

sanjaysen

Electrical
Dec 2, 2002
1
0
0
IN
Dear sir,
Presently we are running a 500 MW boiler of B&W make ,where we are facing tremendous problem of unstability in combustion.Pl guide us for flame stabiliastion.If any other methods are available for flame stabilisation other than viewing through special glass and further adjustment of secondary air dampers pl let me know.
Thanking you

Yours
Sanjaysen
 
Replies continue below

Recommended for you

Can you give the following details
1. Type of boiler
2. Type of fuel and feeding system
3. Colour of flue gas at chimney outlet
4. Furnace pressure
 
Status
Not open for further replies.
Back
Top