Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

View>hide all types-causes screen to minimize

Status
Not open for further replies.

toycept

Mechanical
Jan 28, 2004
294
Just upgraded to SW1014. A problem I'm having....When I go to the View Menu and click on HIDE ALL TYPES"
this causes the entire screen to minimize. Anyone else experiencing this? A real pain. Any fixes?
 
Replies continue below

Recommended for you

video card is Nvidia Quadro 2000. Driver version is 9.18.13.3523
 
The only fix I can think of is to stop hiding all types...probably not much help though.

Jeff Mirisola, CSWE
My Blog
 
I don't know a fix. I don't use Hide All Types. I uncheck everything to hide, then check on if I want to see something.
If you're not on SP4.0, maybe try upgrading.

Chris, CSWA
SolidWorks 14
ctopher's home
SolidWorks Legion
 
Thank you for all the replies and help.

Turned out to be a graphics card issue. When I updated to 2014 sp4 I needed to upgrade
my Nvidia driver. I just did and that solved the problem
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor