Viewing Raster Images on Dwg sheets

[MSPBenson]

Has anyone come across software or any other solution to import a raster image into ug to be viewed on a drawing sheet. The application is artwork to be screen printed onto a moulding that needs to be displayed on the drawing as reference (no dimensioning of the artwork required).
I can get a raster image into modelling but can't view it as the image in drafting.
The only solution I can think of is to convert the raster image to a cgm via a bit of software.

Any comments would be much appreciated.

Cheers

 

[looslib]

What version og UG?

I think the latest, NX3, can do that.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[MSPBenson]

I'm using NX currently but I've got a copy of NX3 to install.
I've read on another thread that this could be done on NX2 but not ploted. Can you plot the image in NX3 now?

Cheers

 

[looslib]

Don't know for sure as I am locked on V18.
Try the internal UGS BBS.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[JimClarck]

Maybe this could help

http://www.eng-tips.com/viewthread.cfm?qid=93596

 

[jpetach]

The raster image(s) on an NX drawing can be plotted in NX3.
(verified on HP DesignJet 1055CM)