relentlessratt
Mechanical
- Mar 1, 2010
- 31
Does anyone have experience with this service?
Water is injected into the heater tubes to increase turbulence and minimize coke lay down. Currently, we are using some milroyal B packed plunger pump. The flowrate is 59 GPH at 505 psig max. We are experiencing very poor reliability. I would like to know if anyone is familiar with this service and what type of pumps are you using?
Water is injected into the heater tubes to increase turbulence and minimize coke lay down. Currently, we are using some milroyal B packed plunger pump. The flowrate is 59 GPH at 505 psig max. We are experiencing very poor reliability. I would like to know if anyone is familiar with this service and what type of pumps are you using?