compman723
Civil/Environmental
I am wondering what size bolts and at what pattern are needed. Because of height restrictions I can't use top hung joist hangers so that is why I need to pack out the web.
Thanks
Thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
W8 x 28 structural beam for girder, need to pack out with 2x..
- Thread starter compman723
- Start date
- Status
OldPaperMaker
Structural
BAretired,
I am glad that you stepped up on this thread. I was going to suggest that the original poster check the Column Stability Factor. A column with 29 kips load and an unsuported length of 19.5' is not something to be fussing around with with a 4x6 or 4x8 column.
Good suggestion about getting a real structural engineer involved.
I am glad that you stepped up on this thread. I was going to suggest that the original poster check the Column Stability Factor. A column with 29 kips load and an unsuported length of 19.5' is not something to be fussing around with with a 4x6 or 4x8 column.
Good suggestion about getting a real structural engineer involved.
- Status
Similar threads
- Question
