rwj2005
Electrical
- Oct 23, 2007
- 3
Hello, I'm looking for some advice. I'm new to this site, and I hope this isn't an inappropriate forum.
I finished engineering college (electrical) in 2003, and got my EIT at the same time. Prior to getting my BSEE, I worked about a total of 7 or 8 years as an electrician in the heavy commercial and light-industrial arenas progressively to the journeyman level (non-union).
My wife graduated nursing school at the same time (2003), and she and I and the dog moved from the East Coast to sunny Seattle WA. My first EE job here was with a traditional A&E Electrical Engineering firm doing commercial/hospital electrical design under direct supervision of a PE.
In hindsight, it was an awesome opportunity with a top-notch firm -- I just didn't realize how good I had it. I was in "Seattle, Land of the High Tech Microsofties," and I jokingly told people that I "got my engineering degree so i could get OUT of construction, and now I'm back in it!" (Not totally accidental: my focus in school was a mix of Digtial Design and Power Systems classes)
My enthusiasm waned as I found myself increasingly distracted by tinkering with various programming projects, and my employer and I wound up parting ways after about 9 months. Thereafter, and for the past 3+ years, I've been employed working with embedded systems and circuit design as an "electronics engineer"
But now that I've got the benefit of hindsight, and the stabilizing influence of a 3-year-old child, I'm realizing that this really isn't where I want to be. I want to get back into the building industry and/or power systems design, and resume working towards my PE. The track I'm on currently will not get me there. The past 3+ years, I have not worked under a PE; there haven't been any in my company.
Honestly, I also just miss the equipment, the feeders and the transformers, the transfer switches and switchgear, etc., and all the quirks of the entire construction industry. As I have a few years as a Journeyman commercial/industrial electrician, I feel like it's really a better fit for me than just being another EE who can do some circuit design and hack his way through mountains of C-code.
On the other hand, the tech industry probably will pay more, at least in the short term. And in these so-called "high tech" fields, a PE is not particularly sought after anyhow, so it wouldn't matter whether I had one or not. Of course, a /degree/ is not always required either, and if you think about it neither is being physically located in this hemisphere. The danger of outsourcing is always on my mind, especially now that I'm older and have a child to consider.
So what do you all think? Should I listen to the people who say "PE's are increasingly irrelevant in today's tech market?" Or should I follow my gut, ditch 3 years of progressive "techy" experience and take a step back -- even though I'm in my 30's and have a child? I'm especially interested to hear the opinions of PE's. I'm kind of at a crossroads but I feel that if I'm going to make the jump, now is probably the time to do it.
Thanks,
Rob J
I finished engineering college (electrical) in 2003, and got my EIT at the same time. Prior to getting my BSEE, I worked about a total of 7 or 8 years as an electrician in the heavy commercial and light-industrial arenas progressively to the journeyman level (non-union).
My wife graduated nursing school at the same time (2003), and she and I and the dog moved from the East Coast to sunny Seattle WA. My first EE job here was with a traditional A&E Electrical Engineering firm doing commercial/hospital electrical design under direct supervision of a PE.
In hindsight, it was an awesome opportunity with a top-notch firm -- I just didn't realize how good I had it. I was in "Seattle, Land of the High Tech Microsofties," and I jokingly told people that I "got my engineering degree so i could get OUT of construction, and now I'm back in it!" (Not totally accidental: my focus in school was a mix of Digtial Design and Power Systems classes)
My enthusiasm waned as I found myself increasingly distracted by tinkering with various programming projects, and my employer and I wound up parting ways after about 9 months. Thereafter, and for the past 3+ years, I've been employed working with embedded systems and circuit design as an "electronics engineer"
But now that I've got the benefit of hindsight, and the stabilizing influence of a 3-year-old child, I'm realizing that this really isn't where I want to be. I want to get back into the building industry and/or power systems design, and resume working towards my PE. The track I'm on currently will not get me there. The past 3+ years, I have not worked under a PE; there haven't been any in my company.
Honestly, I also just miss the equipment, the feeders and the transformers, the transfer switches and switchgear, etc., and all the quirks of the entire construction industry. As I have a few years as a Journeyman commercial/industrial electrician, I feel like it's really a better fit for me than just being another EE who can do some circuit design and hack his way through mountains of C-code.
On the other hand, the tech industry probably will pay more, at least in the short term. And in these so-called "high tech" fields, a PE is not particularly sought after anyhow, so it wouldn't matter whether I had one or not. Of course, a /degree/ is not always required either, and if you think about it neither is being physically located in this hemisphere. The danger of outsourcing is always on my mind, especially now that I'm older and have a child to consider.
So what do you all think? Should I listen to the people who say "PE's are increasingly irrelevant in today's tech market?" Or should I follow my gut, ditch 3 years of progressive "techy" experience and take a step back -- even though I'm in my 30's and have a child? I'm especially interested to hear the opinions of PE's. I'm kind of at a crossroads but I feel that if I'm going to make the jump, now is probably the time to do it.
Thanks,
Rob J