Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

warehouse ventilation 1

Status
Not open for further replies.

ramnam

Mechanical
Feb 27, 2003
20
i am tasked with designing a warehouse ventilation system. here are the option i'm looking at:
1. gas fired make up air in the middle with exhaust fans on both ends of the warehouse.
2. gas fired unit heaters spread evenly throughout the space. exhaust fans on the roof. rely on open roll up doors for make up.

any thoughts?
 
Replies continue below

Recommended for you

ramnam - I think either could work depending on your application. Just be wary of forklift charging stations and production of hydrogen during battery charging. See 1999 NEC
(Section 625-29 I think - from previous post. Not verified).

CB
 
ramnam - Depending of the size of your warehouse you may also want to consider using an air-turnover device. An air-turnover moves uses a prop fan to move large volumes of air over a heat exchanger (and/or cooling coil) providing heating/potential cooling and air circulation. I don't know where you live and I can only think of Canadian manufacturers but I can give you a few companies if you are interested.
 
Chris that's what i ended up doing. i am specifying two air rotation units. no roof hassles, no ceiling hassles!

thanks!
ramz
 
Ramz,

Curious - since its been about a year, am wondering how your system has done so far; any complaints, wishes, etc.?

thanks!
- rob
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor