Warning reported from application Results - Patran

[leggero81]

Hi,

When I read the results of the analysis with Patran, into the bottom bar comes out the following message:

.
.
.
$# Warning reported from application Results
$# The specified results refer to a coordinate system which does not exist.
$# Warning reported from application Results
$# The specified results refer to a coordinate system which does not exist.
$# Warning reported from application Results
$# The specified results are oriented in a system which is unknown to Patran 2013 64-Bit. No user requested transformations or transformations needed for internal processing, such as data averaging, will be performed.



It exists only one coordinate system into the model, coord 0. What is the meaning of these messagges?

 

[rb1957]

nastran believes (rightly or wrongly) that there are missing co-ordinate systems. check that something isn't specified on a node or element card, possibly a property card; maybe nastran elements and nodes are allowed to have a defined co-ord sys.

another day in paradise, or is paradise one day closer ?

 

[WKTaylor]

leggero81

Suggest also posting this question to NASTRAN forum

http://www.eng-tips.com/threadminder.cfm?pid=825

Regards, Wil Taylor

o Trust - But Verify!
o We believe to be true what we prefer to be true.
o For those who believe, no proof is required; for those who cannot believe, no proof is possible.
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion"]
o Learn the rules like a pro, so you can break them like an artist. [Picasso]