Steelforbrains
Mechanical
- May 21, 2005
- 73
I am looking for a certain type of washer, but I do not know what it is called. Our building has I-beam columns and between the columns there is cross-bracing. The cross bracing consists of tension only threaded rods. The threaded rods go through a punched hole in the I beams web and are tightened on each end. Under the nut there is a special washer. It is flat on one side and round on the other. It is used to compensate for the angle between the threaded rod and the column. I cannot find these washers, and I do not know what they are called. Can anyone help?
Thanks
Thanks