Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water fountain water consumption

Status
Not open for further replies.

ParadigmEnergy

Mechanical
Sep 29, 2010
10
0
0
US
Does anyone know of any resources or standards that specify how to calculate annual water consumption for potable water fountains based on occupancy for commercial buildings? I'm thinking ASHRAE or LEED...?
 
Replies continue below

Recommended for you

I have always assumed this is just rolled into the overall water consumption. If the occupants aren't getting water from the fountains, they are getting it from the pantry sinks.

Standard spec for flow is 8 GPH, 3/8" tube.

Are you specifically looking for a broken out number?
 
I'm attempting to balance all of the water outlets in an existing bldg with the historical records (ie a water audit) and want to make sure I don't put too much in the "misc" category. I was thibking that I might take a percentage of the recommended daily water intake per occupant as an approximation. I was just hopping that there was an ASHRE guideline.

 
Status
Not open for further replies.
Back
Top