Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water in oil tank

Status
Not open for further replies.

doron

Mechanical
Jul 13, 2000
6
0
0
IL
Where acn i find data about treating oil tanks with water absorbant polymers?<br>
 
Replies continue below

Recommended for you

water in oil storage tanks can be emulsified with the fuel oil by using bio-additives such as E-OIL manufactured and marketed from INdia Chennai.E-OIL effectively acts as a bio-emulsifier when it brings all the seperated oil and water molecules together and forms an emulsion which helps in improving the flame quality and steady flame.
Water in oil tank is primarily fue to the improper storage and handling conditions such as leakage of water through manholes etc.This could cause severe sludge problems in the tanks and cause pumping problems as well.
Contact C.Sripati,OstenEnzymeIndia(P)Ltd.2d,eldorado,112,N.H.Road,Chennai-34,India,
email:diazyme@md2.vsnl.net.in,Phone:91-44-825 3337,820 6085,8206845,Fax:91-44-827 5687
 
Status
Not open for further replies.
Back
Top