gjeppesen
Civil/Environmental
- Jun 12, 2003
- 47
Hi,
I've been asked to do the "design plans" for the domestic water system for a commercial bathroom (one sink, one toilet). Problem is I've never done anything but water distribution design for public utilities. It is a public project and this is at a bus stop in the mountains of Colorado. There is an existing well that we are using that was previously put in for agriculture in the 60's. We had a pump test on the well already and the well is sufficient, but we need a new pump.
I'm not even sure where to start. Questions I have:
1. How specific do I need to get on the plans? It seems that the vendors bidding on this would design this in their sleep.
2. What do I need to show on the plans and put in the specs?
3. Bla, bla, bla.
I've been asked to do the "design plans" for the domestic water system for a commercial bathroom (one sink, one toilet). Problem is I've never done anything but water distribution design for public utilities. It is a public project and this is at a bus stop in the mountains of Colorado. There is an existing well that we are using that was previously put in for agriculture in the 60's. We had a pump test on the well already and the well is sufficient, but we need a new pump.
I'm not even sure where to start. Questions I have:
1. How specific do I need to get on the plans? It seems that the vendors bidding on this would design this in their sleep.
2. What do I need to show on the plans and put in the specs?
3. Bla, bla, bla.