Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

weld build up repair in the knuckle region

Status
Not open for further replies.

janosnemet

Mechanical
Joined
Sep 4, 2015
Messages
1
Location
RS
Hi,
is it allowed to perform weld build up repair on the inner side of a torispherical head in the knuckle region.
The defective area is localised,its overall diameter 15mm, extending to cca 1/3 of the original wal thickness.
The vessel is horizontal, cylindical, Ø 2100 mm, volume 30 m³, used for LPG storage.
All repair activites would be performed under pertaining codes and standards.
kind regards
Janos

 
If "All repair activites would be performed under pertaining codes and standards" then it is allowed.

Regards
r6155
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top