parham7713
Materials
What welding consumables can i used in welding and repair of a276 s41500 for pump shaft and i need repair procedure.defect of shaft is out of roundness.we want increase thickness of shaft by welding before machining.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding procedure for a276 s41500 material
- Thread starter parham7713
- Start date
- Status
The ASTM A 276 UNS S41500 is a wrought version of CA 6NM. I would use an ER410 NiMo welding consumable for weld overlay. This filler metal is comparable to CA 6NM. Do you have any idea as to how to weld this material, including preheat, and post weld heat treatment requirements?
If you don't know how to weld this material, I would suggest using the guidance below for CA 6NM castings;
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question