Welding stainless steel onto mild steel 1

[mrcasper]

Hello,

How practical is it to weld a 36" stainlees steel strip 1/4" thick onto a mild steel plate 1/4" thick along the edge?

Are there alternatives to fasten these two metals together?

Thank You

 

[Ron]

It can be done, but what kind of properties do you need from the finished weld? Check with a local welding supplier...they can give you the correct electrode and settings to use.

 

[mrcasper]

The equipment would be subjected to repeated drops, of approx 150ft, average weight of 200lbs.

All I require is that the weld doesnt break.

Will call local supplier now.

Thank You

 

[BAretired]

Why don't you use a mild steel strip? Then there is no problem at all.

BA

 

[connectegr]

This is done frequently. Refer to AWS D1.6, weld information. If subjected to repeated dropping, the welds should be designed for a factored impact force and posibly fatigue.

http://www.FerrellEngineering.com