Weldments and structaural shape sizes 2

[sl99]

I am using SW2004 SP 2.1. I am designing a machine base using weldment menu (Insert > Wedment). I created a path and the tried to insert structural member.
Pull down menu under Selections:
Standard> ansi-inch
Type> angle iron
Size>..
Unfortunately size offers me only 3 sizes, what should I do in order to add another size.

Thanks in advance, SL

 

[SBaugh]

This explains how to make more sketches for your Weldments profiles

http://www.scottjbaugh.com/Tips_Tricks/Custom_Weldment_Profiles.htm

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376

 

[sl99]

Thanks,
I need just 4 x 4 x 1/4" angle and thought it should be in the SW. I tried to use toolbox> structural shape> created, but it creates only a sketch and does not add profile to selection
Sl