I've been doing a lot of weldments as of late and creating my own profiles. These are all for handrails. In the part, it's rendering all the hidden lines visable even through a shaded drawing. I have all the hidden lines turned off too. This seems like a random event, it doesn't happen all the time.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Weldments rendering weird
- Thread starter Tstover
- Start date
CorBlimeyLimey
Mechanical
The image you posted doesn't show hidden lines? Was it meant to?
Intermittent graphics anomalies are often caused by incorrect or bad graphics card and/or drivers.
Which graphics card and driver are you using?
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Intermittent graphics anomalies are often caused by incorrect or bad graphics card and/or drivers.
Which graphics card and driver are you using?
- Thread starter
- #3
256MB ATI Radeon X1300PRO is the graphics card. not sure about the drivers. I think your right about the hardware thing. The jpeg I loaded was supposed to show the hidden lines. I guess I should have checked it first. I guess it's purchase order time.
Thanks for the help.
Thanks for the help.
CorBlimeyLimey
Mechanical
None of the Radeons are certified for SolidWorks, although some of them do work reasonably well. That is probably the source of the problem.
Check here for certified cards and drivers.
Check here for certified cards and drivers.
- Status
Similar threads
- Locked
- Question
- Locked
- Question