Jun 27, 2008 #2 csd72 Structural May 4, 2006 4,574 Are you talking about chemical anchors? If this is the case Nrec is the recommended axial load capacity and Vrec is the recommended shear capacity. Upvote 0 Downvote
Are you talking about chemical anchors? If this is the case Nrec is the recommended axial load capacity and Vrec is the recommended shear capacity.
Jul 1, 2008 Thread starter #3 sloccc Structural Jun 27, 2008 5 This is what I'm reading from a report Use: 2-#6-32 Screws Nrec=205lb; Vrec=101lb Nall=152lb; Vall=50lb 152/2x205+50/2x101=0.62<1.0 OK Upvote 0 Downvote
This is what I'm reading from a report Use: 2-#6-32 Screws Nrec=205lb; Vrec=101lb Nall=152lb; Vall=50lb 152/2x205+50/2x101=0.62<1.0 OK
Jul 1, 2008 #4 MarcbSE Structural Jun 21, 2006 130 Nrec would be the allowable tension or pullout capacity and Vrec is the allowable shear. Upvote 0 Downvote
