Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What does this warning mean?

Status
Not open for further replies.

ML24

Mechanical
Sep 24, 2010
5
When I'm in advanced simulation and I try to solve a model, I get the warning: There are no output requests selected for step "Subcase - Static Loads 1".
 
Replies continue below

Recommended for you

It means you've not selected any outputs for the solution; usually the default is set up with basics such as displacement, stress, etc. You need to look at the case setup and ensure that your Structural Output Requests are set up.
 
I changed the output and it solved without any warnings or errors... however I still can't get a solution. I had the exact same settings for another part (No output requests, that is) I did FEA on and it worked so why is this one not working?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor