what is ANSI hatch for Glass

[bearisle]

Is there a hatch pattern for glass in ACAD2000?

 

[Exxit]

*glass,Glass pane
60, 0,.05, 0,.866, .28,-.72
60, .12,.1, 0,.866, .12,-.88
60, 0,.1, 0,.866, .2,-.8
60, .06,.05, 0,.866, .25,-.75
60, 0,0, 0,.866, .4,-.6
60, 0,.15, 0,.866, .1,-.9
*glass2,Glass, large area
63.43494882, .1,.05, .9,.9, .5,-.3,.5,-.3,.2,-.436067977
63.43494882, .075,.075, .9,.9, .4,-.5,.3,-.3,.35,-.386067977
63.43494882, .075,.15, .9,.9, .3,-.6,.2,-.3,.45,-.386067977
63.43494882, .15,.075, .9,.9, .3,-.6,.25,-1.086067977
63.43494882, .225,.15, .9,.9, .15,-.75,.1,-1.236067977
63.43494882, .1,.275, .9,.9, .1,-.75,.1,-.4,.25,-.636067977
63.43494882, .55,.2, .9,.9, .5,-.75,.6,-.396067977
63.43494882, .55,.125, .9,.9, .7,-.5,.75,-.296067977
63.43494882, .6,.15, .9,.9, .8,-.4,.6,-.436067977
63.43494882, .675,.225, .9,.9, .5,-.7,.4,-.636067977
63.43494882, .6,.375, .9,.9, .25,-1,.3,-.686067977
63.43494882, .75,.3, .9,.9, .2,-1,.2,-.836067977

ADT 2004
ACAD 2002

 

[bearisle]

Sorry Exxit, I need to know how to utilize this info if possible (still rookie)

 

[Exxit]

bearisle,

search for Your acad.pat file, or acadiso.pat. Inside are the definitions of the hatches-> open the file with an editor (notpad e.g.)-> copy the glass-hatch inside the *.pat
thread555-87167
more infos

Lothar

ADT 2004
ACAD 2002

 

[DwattedWabbit]

You should find a hatch pattern for glass under

"bhatch\quick\(click the dotted button to the right of the pattern box)\custom"

and one of the patterns listed there is "glass."

(Or am I being too obvious and you've already gone there and looked at this and are looking somewhere else?) These custom hatch patterns don't get used often in the civil engineering field I work in, so most folks I know either don't know about them or don't know much about them. People in other fields may use them all the time.

 

[bearisle]

Thanks Exxit
schetwynd: Glass was not an option in my system. I tried that first.

 

[SteveSmith]

ANSI36 is for glass, slate & marble.