Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

what type of nozzle to use

Status
Not open for further replies.

khalchris

Mechanical
Apr 17, 2013
33
I am drilling a metal plate and I will be using liquid nitrogen as a coolant to cool the drill bit and the workpiece , the Liquid nitrogen will be supplied externally from a liquid Nitrogen Dewar, I am thinking to use a nozzle at the end of the hose and I was wondering which is the best type of nozzle to use in order to have the most efficient cooling effect.

The pressure will be between .5 - 1 bar , the hose diameter is 1/2 inch ( 12.7 mm)

the drill bit i am using is 6 mm diameter and the plate dimensions will be 200*100*15 mm
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor