What's this part number

[Finglas]

Long shot but does anyone know the part number/manufacturer for the cable mounts/clips indicated?

 

[Artisi]

Have you tried Google photo search, I've never used it so have no experience, maybe of help maybe not. -

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)

 

[CWB1]

You might have better luck sending this to Hellerman and the other clip manufacturers or one of the supply houses like Mouser.

 

[zeusfaber]

What are those devices that are clipped into them? The clips look like they were supplied as part of the device. If that's the case, then the device vendor may list them as a spare (if you're lucky).

A.

 

[itsmoked]

I tried image search all it would cough up was 'digital camera'.

Keith Cress
kcress -

http://www.flaminsystems.com

 

[MintJulep]

Looks like it might be a custom part to clip whatever the thing being clipped is.

 

[TenPenny]

It looks similar to this, but with a different clip arrangement, a long tedious search based on this, and the manufacturer appears to be uxcell, might lead you to something:

https://www.ebay.com/itm/65-Pcs-Bla...83.l44720.c10&nordt=true&rt=nc&orig_cvip=true

 

[Finglas]

We eventually found out what this was, it was a modified standard part from SMC.

https://www.smcpneumatics.com/TM-10.html

SMC Mfr. Part No.:
TM-10

 

[zeusfaber]

Thanks for feeding back. Always good to hear somebody's good news.

A.

 

[itsmoked]

Right up 3D printer alley!

Keith Cress
kcress -

http://www.flaminsystems.com