Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

where to find this logo to add to title block

Status
Not open for further replies.

bxbzq

Mechanical
Dec 28, 2011
281
Hi,
I need to set up drawing templates in the new company. I would like to add something similar as attached to title block. Where can I find proper font and similar NX logo?
 
Replies continue below

Recommended for you

Where did you find the 'artwork' that you posted? You can add any image file you want to a Drawing template file, like I've done on the attached example (just set layer 256 to be selectable to get access to the artwork itself).

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
 http://files.engineering.com/getfile.aspx?folder=263e4637-9890-4fd0-837b-72ec33fd2948&file=A3-size_drawing_template.prt
John,
I found the NX logo in jpg on internet.
The problem with Insert->image to cell in a table is that the image is not embedded to the cell. I can move the image freely. Also when I move the table the image does not stick it to the table.
We can live with this but if possible I would still give a try.
 
That's true, an image can be placed over the top of a cell, but it will not be considered part of the cell itself. However, for something like a Drawing Border, it's generally NOT an issue since once placed, Drawing Borders are hardly EVER moved.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor