Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Which code applies to the stress analysis of pipes for LNG production systems on ships?

Status
Not open for further replies.

jgilrod

Mechanical
Dec 22, 2023
3
Good afternoon, any recommendations to follow. The design of the ship and therefore the other systems such as piping will follow the guidelines of code 467-NR_PartC_2023-07 STEEL SHIPS of BUREAU VERITAS.

But this standard indicates that the flexibility of the pipe must be analyzed, so it is not clear to me what code I have to use in the CAESAR II program. For me, the ASME B31.3 standard would apply but I would like if an expert in the field could help me with the standards to use for the design of the pipes (natural gas, LNG, bog, water, sea water, compressed air, vents , drains and lubricating oil).
 
Replies continue below

Recommended for you

B31.3 is probably the one to use, but I personally have not used it for LNG on ships.

--Einstein gave the same test to students every year. When asked why he would do something like that, "Because the answers had changed."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor