Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Which Laptop?

Status
Not open for further replies.

PGJ

Mechanical
May 22, 2003
12
Can anyone suggest which laptop to buy for S/W 2005 and is the graphics card certified. I have been looking at the Toshiba Tectra M2/1.7Ghz/NVIDIA GForce FXGO 5200 graphics card but I really don't know. Any suggestions would help.
 
Replies continue below

Recommended for you

Dell M-20, M-60, M-70. Workstation class laptops that run SW with no issues. At least I haven't had any issues and I've been using an M-60 for about a year for everyday modeling work.

Rob Rodriguez CSWP
SW 2006 SP 2.0EV
 
Do a search here and you'll get a lot of previous information that is still relevant.

[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
 
One thing I can suggest PGJ, is that you please search this forum and FAQ section before posting a question. This topic was raised two weeks ago and has seen a lot of action in the past year. Please do your part by searching before posting.

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

"Coming together is a beginning, staying together is progress, and working together is success." - Henry Ford




 
Status
Not open for further replies.

Part and Inventory Search

Sponsor