Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

whipping analysis

Status
Not open for further replies.

sachin46

Marine/Ocean
Jun 12, 2013
33

DEAR ALL,
I am doing whipping analysis in ANSYS. in order to carry out analysis I have pressures calculated from CFD at each time interval .(i.e. from Star ccm software) .My aim is to calculate the vertical bending moment (VBM) amidships, from literature survey I understood that I have to remove still water moment in order to get VBM.
Anybody has any information on how to remove the still water moment from pressures obtained in CFD.
In one of my trail I have subtracted static pressure (rho*g*h) from total pressure at each time instant, is it correct approach?
Kindly guide for same
Regards,
SACHIN46
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor