Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Who is doing Protection Coordination Studies in Ontario

Status
Not open for further replies.

pristava

Industrial
Jan 8, 2004
53
Who is doing Protection Coordination Study here in Southern Ontario Canada.
System what we have is very small 5-6 nodes only, and we have to coordinate 5KV fuses with 600Volts MCCB's.
Thanks.
bobziva@yahoo.com
 
Replies continue below

Recommended for you

If you can't find anyone local, my company could do it for you. We are in the central U.S.
 
Contact this # 1-888-8125578. APGi is located in Ontario.
 
GE Engineering Services does coordination studies and has operations in Canada. 800-533-5885
 
this is one reason not to specify GE stuff, as they compete agains us consulting engineers..tell GE..
:))
 
My company will do a protection study and an arc flash hazard analysis. Training on arc flash analysis can be included as well as stting up a electrical safe work practices program.
Contact Workplace Safety Solutions, Inc., 802-288-9441. They are located in Vermont, not far from border.
 
You can give it a shot to ALGAL & Associates Ltd. - Engineering Services, Toronto, Ontario
Phone: (416) 484-4200.
 
You will find that each of the major switchgear manufacturers will perform short circuit, coordination and arc flash studies. GE, Square D and Siemens. Of course I prefer you choose a engineering firm to provide unbiased results.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor