Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why can not two modes coincide perfectly for some cases in Flutter phenomena?

Status
Not open for further replies.

Patkin

New member
Jan 27, 2012
9
Hi dear friends,

I have a question about flutter phenomena. As you know, flutter occurs when two modes ( for example first mode and second mode ) coincide ( I mean after a specific velocity, the frequencies of two modes, will be the same and equal) and the damping term will change into positive which causes failure.

However, for some cases, frequencies of two modes do not coincide perfectly ( I mean they are not equal ) and damping parameter negative sign will change into positive, which mean flutter is happening.

Why this is happening ?! Why the frequencies of two modes can not coincide perfectly ?!
 
Replies continue below

Recommended for you

I suggest you try it with a coupled spring mass 2 dof system (ie ground-spring=-mass-spring-mass-F. You /always/ get 2 modes, at different frequencies. There is a good reason for that.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor