Windows 7 and CATIA R18

[itsmyjob]

I know it is not supported by DS but I would like to know if someone had CATIA R18 installed on windows 7 (plz give detail about 32bit or 64bit) and if it works?

Thanks

Eric N.
indocti discant et ament meminisse periti ​

 

[DBezaire]

I have R18SP8 installed on a Dell T1500 Workstation with a Nvidia Quadro FX580, 8GB ram on 64bit Windows 7. It is a conference room computer so use is limited but it seems to function well. We make some changes to models and assemblies during the tool review meetings.

Regards,
Derek

 

[itsmyjob]

thanks

Eric N.
indocti discant et ament meminisse periti ​

 

[itsmyjob]

Is that a 64bit CATIA or a 32 bit CATIA on this 64bit Win 7?

Eric N.
indocti discant et ament meminisse periti ​

 

[Azrael]

I have R18SP6 32bit and R19SP5 64bit installed on T5500 with W7 64bit with a quadro 1700. I know it's not supported but works like a charm.
Rumours say that R19 and R20 will soon be offically supported on W7 and on the 64bit W7, haven't heard anything about R18 though.

 

[DBezaire]

Sorry, that was 64bit Catia on 64bit OS. I have 19SP6 - 64bit installed with no issues. We use 3D Via and the smg files display well.

Regards,
Derek

 

[dlomshek]

I have V5R18 (32 bit) installed on a 19 inch AlienWare laptop running Win 7 with no problem.

D Lomshek
Pittsburg State Univ.

 

[drewboy23]

I have v5r18 sp5 running on a Dell m4400 laptop with Windows 7 64-bit.