Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WOG pressure ratings

Status
Not open for further replies.
Santha

Santha

Mechanical
Mar 15, 2003
7
I would like to know where I can find the pressure temperature ratings for WOG or CWP classes like 1500, 2000, 3000 and 6000

SS
 
Replies continue below

Recommended for you

Sort by date Sort by votes
These classes are no longer associated with a pressure/temperature rating but rather with a pipe wall thickness or schedule. See ASME B16.11 Table 2.
If you would like to go back in history and see the original class to p/t relationship you'll need to go to the 1966 edition of ASA B16.11.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question
Thin Walled Pressure Vessel
Replies
4
Views
1K
TGS4
TGS4
1965mt
  • Locked
  • Question
Pressure Washer code requirements
Replies
0
Views
115
1965mt
1965mt
V
  • Question
Is pressure retaining fillet weld qualification by fillet weld possible under ASME IX. 2
Replies
3
Views
2K
IdanPV
IdanPV
mariolucas75
  • Locked
  • Question
ASME pressure vessel internal pitting weld build-up repair 1
Replies
7
Views
300
mariolucas75
mariolucas75
Virendra Patel
  • Locked
  • Question
Replacement of same pressure vessel part (HX bonnet) needs only R-1 report. 1
Replies
2
Views
243
rachnatbovo
rachnatbovo

Part and Inventory Search

Sponsor

Back
Top Bottom