Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wooden dowel Roll bender ?

Status
Not open for further replies.

Uralsk

Mechanical
Feb 21, 2021
39
Is it feasible to make metal plate roll bender out of dowel wood with thick aluminium inner core?
 
Replies continue below

Recommended for you

Certainly. Why not? You would need to develop all of the engineering and details. Material cost may not be too much different between the wood and using more conventional steel rolls, though. Wear characteristics of wood are probably going to result in shorter machine life.
 
"wood" = hobby/hardware store hemlock, pine, birch or oak?

Putting the aluminum in the center wastes a lot of bending stiffness and strength. At least 50% is my guess.

electrical conduit with wood dowel jammed in, or with a mortar ooncrete filling might be WAY stiffer

Is one end of these wood dowels inserted in a wooden plate ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor