Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Work Station for FEA

Status
Not open for further replies.

IdanPV

Mechanical
Aug 26, 2019
432
Hello all,

I would like to know what are the recommended workstation hardware for FEA PC.
The software in use is SOLIDWORKS Simulation (including the non-linear module).
The results plots most be in "discrete" and it's required good GPU.

Can you please advise the best GPU, CPU, How much RAM, SSD, etc.

Thanks
 
Replies continue below

Recommended for you

more RAM, good graphics card. SolidWorks should be able to advise on minimum equipment.

another day in paradise, or is paradise one day closer ?
 
Best to buy a computer that can take more RAM than you can afford. Cheaper and faster to add more later than start a search for another computer if you run out.
 
Hi all, thanks for the help.

I do static analysis, linear and nonlinear.
per ASME VIII-2.

It will be great if you can advise specific spec.like: which CPU, how much RAM, which GPU
 
This is one of my desktops... the one I use about 80% of the time:

image_yf6gmx.png


Rather than think climate change and the corona virus as science, think of it as the wrath of God. Feel any better?

-Dik
 
Some good info... my RAM latency is poor, but the best chips I could source at the time... also 16 GB RAM is the 'sweet spot' for nearly everything... you have to be careful about your Windows OS since some versions do not support large amounts of RAM. My system is liquid cooled Kraken CPU cooler.

image_ykul1a.png


Rather than think climate change and the corona virus as science, think of it as the wrath of God. Feel any better?

-Dik
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor