Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Workbench, difference of two results computation

Status
Not open for further replies.
ayahk

ayahk

Mechanical
Apr 23, 2013
8
Is it possible to compute the difference beween 2 results in ANSYS workbench? for example, from simulation1 results and simulation2 results we somehow subtract the results to get the error?

Thanks alot!!

Regards,
Jessi M.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
I will reply to myself because i found the solution!
There is a Result system in ANSYS workbench, it can compare the results of 2 simulations or more. After combing all results run the simulation and export data.

Regards,
Jessi M.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
552
struclearner
struclearner
H
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
2K
karachun
karachun
IJR
  • Locked
  • Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
511
IJR
IJR
IJR
  • Locked
  • Question
Workbench 19: Submodelling (?) error
Replies
0
Views
151
IJR
IJR
Jeremy1989
  • Locked
  • Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
138
Stick.
Stick.

Part and Inventory Search

Sponsor

Back
Top Bottom