Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wound rotor motor.
- Thread starter ProWinder
- Start date
hesselberth
Industrial
At full nameplate RPM is when you will produce nameplate HP. HP is a funtion of speed & torque
HP=tourque (Lb Ft) X RPM/5252
HP=tourque (Lb Ft) X RPM/5252
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question