Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

XFEM crack: static/general versus dynamic/implicit

Status
Not open for further replies.
Eleo

Eleo

Mechanical
Mar 2, 2015
26
What is the difference between 1) the static/general procedure for step-1 and 2) the dynamic/implicit procedure
in the case or a XFEM crack ? Is the time taken into account in the results generated from the first procedure ?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Zaurbek
  • Question
Different results for Static General, Dynamic Implicit and Dynami Explicit
Replies
6
Views
4K
FEA way
FEA way
G
  • Question
Abaqus explicit - general contact problem
Replies
5
Views
5K
FEA way
FEA way
S
  • Question
ABAQUS Dynamic Explicit: Stent Crimping
Replies
19
Views
7K
FEA way
FEA way
IcarusAero223
  • Locked
  • Question
XFEM in Abaqus/Standard for 3D CFRP layup - nodal level set value error
Replies
9
Views
2K
FEA way
FEA way
jball1
  • Locked
  • Question
Static vs dynamic application of load
Replies
1
Views
354
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom