XpresReview 8

[DigiBob]

Has anyone used this product from Siemens? If so, how does it work? Can you use it with Native UG or do you have to have teamcenter xpress? Not much documentation on the website..

Bob Snead
Designer
Northropgrumman.com

 

[JohnRBaker]

XpresReview opens what is known as a 'Package File'. For information about how to export one of these files, open your NX Help files and do a search on 'XpresReview' and you will find an entry covering Package Files.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[DigiBob]

Thanks John, I never new about that. I don't have a license for package files so I will have to look into that.

Bob Snead
Designer
Northropgrumman.com

 

[Arkance/PhoeNX]

XpresReview works quite well.

It needs to be installed on the same system as NX is to work.
You also must have "pcf_package_file" in your license. If you have on of the MACH bundles then you will have that feature in the license.

Inside of NX, File -> Send to Package File, will take your open model and then convert & send to XpresReview. XpresReview will be opened and you will see your model in it. Then save it as a package file which can then be sent on to anyone else that has XpresReview installed.

Anthony Galante
Senior Support Engineer

NX4.0.4MP10, NX5.0.0->5.0.6, NX6.0.0->NX6.0.5, NX7.0.0->NX7.0.1 & NX7.5.0.32-> NX7.5.2.5

 

[PSI-CAD]

PVTRANS module must be installed, if not "send to package file" will not appear under "file"


Regards
Didier Psaltopoulos

http://www.psi-cad.com