Yellow face on part?! 1

[hititfaster]

Hopefully there's a simple answer to this as it's bugging me. It's only happened on a couple of parts in months of SW use, but I'm struggling for an explanation, and searches haven't revealed an answer.

Why is this face yellow? I haven't changed its' colour and the last time it happened I ignored it ("I'll fix it later" I thought) and it disppeared of its own accord.

 

[manxJim]

If you are using the default colour scheme
It could be one of the following

DimXpert, Under Constrained
Mate callout, warning
Or Temporary Graphics,


Jim Self
SW10 SP4.0
Dell Precision T7500
Win 7 64bit
6GB Ram
Quaddro FX 4800
dlplimited.com

 

[Eltron]

Looks like maybe it's just the light from your environment that you have selected. Try changing your scenes/environments/lighting.

Dan

http://www.eltronresearch.com

Dan's Blog

 

[SBaugh]

I agree with Dan... or just turn Realview off.

Regards,

Scott Baugh, CSWP
Berry Plastics
Cad Admin\Design Engineer

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[hititfaster]

That did it. Really perculiar - and threw me - that it showed up in the master assembly as well as the sub-assembly! Thanks lads.