Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B31.3 2024 Public Review Draft 1

Status
Not open for further replies.
XL83NL

XL83NL

Mechanical
Mar 3, 2011
3,054
ASME has posted a copy of the public review draft for B31.3 2024 on C&S Connect. A copy can be found here:
(a direct link seems to get invalid every day, so take this link and scroll down until you see B31.3 20xx and a download link underneath).

The draft only shows the approved ballots.

Public comments may be submitted on proposed new ASME Standards drafts and on proposals to revise, reaffirm, or withdraw approval of existing ASME Standards. Comments should be addressed to the Staff Contact indicated for the particular proposal, with a copy to the Board of Standards Review, American National Standards Institute, 25 West 43rd Street, New York, NY 10036. Fax: 212-840-2298; e-mail: psa@ansi.org

All ASME public review proposals are available in hard copy at no cost and may be ordered from:

Terrell Henry, Administrator
E-mail: ansibox@asme.org
ASME Codes & Standards
Two Park Avenue
New York, NY 10016
Click to expand...

Huub
- You never get what you expect, you only get what you inspect.
 
please verify the link . . . I get "Incorrect file path. Please check back to the site".
 
Should work now

Huub
- You never get what you expect, you only get what you inspect.
 
the 2nd link works great. Thank you!
 
Ive edited my first post as the link seems to become invalid after so many hours every day. The link leads to a site containing the live download link.

Huub
- You never get what you expect, you only get what you inspect.
 
I see B31.1 is also out for comment.
There is a change in B31.1 for wind and earthquake design

"Allowable Stress Design reduction factor shall not be applied."

Does B31.3, B1E have the same change under way?
 
B31.3 TN17-2574 has been prepared some time ago and seems to be the equivalent of the process piping code. However, there hasn't been much work/update on that item in recent years.

Huub
- You never get what you expect, you only get what you inspect.
 
Status
Not open for further replies.

Similar threads

S.G
  • Question
Category M (ASME B31.3) 1
Replies
2
Views
1K
S.G
S.G
T
  • Question
ASME B31.3 | Titanium Values of Coefficient Y | Table 304.1.1
Replies
1
Views
654
GD2
GD2
charles_ac
  • Question
ASME B31.3 2018 - Minimum impact test exemption temperature reduction
Replies
7
Views
3K
GD2
GD2
deepu78
  • Locked
  • Question
Derating of process piping designed to ASME B31.3 2
Replies
6
Views
254
georgeverghese
georgeverghese
Flexluthor
  • Locked
  • Question
RT ON SEAMED PIPE AS PER ASME B31.3 1
Replies
5
Views
210
Flexluthor
Flexluthor

Part and Inventory Search

Sponsor

Back
Top Bottom