Recent content by Ani18

Thanks for the clarification DVWE. I really appreciate that.

Thanks DVWE for your opinion. Test coupon is good to denote both plates and pipes. But does Test Plate entirely mean "Plate Test coupon"?

Thanks David. The statement that confuses me is the quotation UG-84(h)(2) "The test plate material shall satisfy all of the following requirements". The wording "Test Plates", creates all the confusions in my mind.

David that means both pipe and plate should be in the same heat treated condition as that of Procedure Qualification?

Thanks GD for the insight

Does UG-84(h)(2)(b) only applicable only to plate material not for pipe?.

Thanks man

So UG-84(h)(5) statement says welding procedure shall be qualified by testing sperate sets of impact test specimens removed from weld metal and heat affected zone . Then how can I use a full specimen? Please explain When sperate sets of imppact specimens are used for individual process then how...

So UG-84(h)(5) statement says welding procedure shall be qualified by testing sperate sets of impact test specimens removed from weld metal and heat affected zone . Then how can I use a full specimen? Please explain When sperate sets of imppact specimens are used for individual process then how...

So the better option is to weld each process in a separte test coupon and impact test individually.

Thanks man

But as per UG-84(h)(5)multiple process welding procedure states separate sets of impact test specimen required from each process.

Sorry, CVN specimen for gtaw weld metal 3.3x 10mm.

Hi experts i just want to know what will be the impact temperature reductions per Table UG84.2 (1) Base material thickness is 9.27mm. (2) Deposited weld metal thickness - GTAW (4mm) & MAW(5.27mm) (3) MDMT temp. is -31degree Celsius. In my opinion it will be -50 degree C. is it correct for...

Subject: Qualifying Two Test Processes on One Plate Code Edition: D1.1:2006 Code Provision: Tables 4.2 and 4.11 AWS Log: D1.1-06-I18b Inquiry: (1) Can I qualify two welding processes on one test plate? (2) Do I use the deposited weld metal thickness for each weld process to establish the range...