You'll need training, yes. And you'll all need years of practice both reading and implementing proper geometric controls, creating proper DWG titles, creating formats, drawing standards for text, dims, notes, rev blocks, etc. - It's quite an undertaking to be adopting a standard - ISO or ASME...
I was going to say, just before I saw the bit from Y14.3, that shaded views could potentially improve one's ability to accurately interpret a drawing, but that in most cases it would be adding unnecessary detail which could actually be detrimental do the reader.
The paper, or white background...
A chamfer indicated in a section view of a threaded hole, or similar feature, is understood to 'wrap' around the entirety of the feature. If that were Not the case, then clearly defining the extents of the chamfer would be necessary... Therefore, the lack of such definition indicates that the...
drawoh,
70% ±30%
It's a hunch, but a fairly strong one to be sure...
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I HATE PLANTS!!
Hi OP,
IMO - "Constant" is this individuals' way of indicating that the dimension should be a constant value, without variation (except as is allowable per the stated tolerances), throughout the entirety of the feature. This idea however, is already implied based on the basic rules of the ASME...
I need some additional help on this... This works for the most part, but there are a couple of additional conditions that I need to incorporate and if anyone can help, I'd greatly appreciate it.
1) The end of each line, whether it be two or three lines (but not one line - which rarely will...
I suppose I think about this a bit differently than most... When I see the crescent shaped tolerance zone of a radius, I tend to think of it as more of a dimensional residuum, like a fractional remainder of sorts... Because the edge of the radius is tangent to two edges typically, the...
I think I figured it out...
I tweaked some of the extract strings and changed the position or length values. It works!
I may need to add a LEN4 as well as a DWGTITLE3 IF/THEN scenario but otherwise this works great!
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I...
Hey, so I just have one final question... If I wanted to ensure that the comma at the end of the line break was always included (e.g. BRACKET, CONVEYOR, <2ND LINE> PANEL,...) how would I go about doing that? Currently what happens is that the comma at the end of line 1 gets removed. I went...
Holy... Hey looslib, that's great!! Thank you for putting that down for me. I may need to tweak it here or there, but after initial testing it looks like that works!
I owe you a beer.
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I HATE PLANTS!!
Hello gentlemen, I have a question about parsing strings so that I can properly format the DWG title in the new formats I'm working on.
We use your typical ASME Y14.100 drawing title scheme: Text, Text, Text, Text, Text
Our DWG titles are limited to 50 characters (legacy software of course)...
Not to sound overly picky, but what's the purpose of the "140 FULL HOLES" note? I believe the diameter symbol along with the picorial representation of the part entirely defines those features. You could simply say "147X ֍.252-.256" and remove the portion about the "half-holes" as well.
I'm not...
Oh, okay - I thought you wanted to disable the draggers... You want to disable the ability to select a sketch entity in the edit feature mode and move it?
I'll look into it.
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I HATE PLANTS!!
In the config.pro, do a search for the option "DISPLAY_DRAGGERS" and set to NO. This will remove the dragger functionality in edit mode and only allow manual input of dimension values.
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I HATE PLANTS!!
@drawoh True position requires a feature of size, which roughly means, a feature with two opposing points.
I'm not a vegetarian because I dislike meat... I'm a vegetarian because I HATE PLANTS!!
