Recent content by hyari

Hi . Any body has an idea about some suppliers of the couplers for the domestic water meters ? in the market we have CONEX UK , so am looking for other brand good quality and competitive . Thx in advane Ahmad

Dears , we have one project and they need wrapping tape . the material we have is Butelyen PE/RUBBER with 0.8 mm thickness , but the specs of the project is called fro PVC Butmen type thickness 1.1 mm ! So how can i approach the client to approve my tape and from your point of view which...

Hi , what is the main difference in DI disk and stainless steel disk of butterfly valves ? in case the applications are TSE OR SEWAGE and what is the advantage / disadvantage of both Thx Ahmad

Hi , What is the purpose of using Needle valves instead of other valves like gate and butterfly ? any specific application for the needle valves ? and what is the advantages . Ahmad

Hi , What is the difference when they mention - FOR EXAMPLE - ( the valve flange according to EN1092-2 & the drilling to DIN 2501-PN 10 ) 2ND question , how can i know if the valve is matching with the flange ? shall i check the PN Drilled or what ? Ahmad

thx all ahmad

Dear LittleInc , which kind of information i can provide ? Ahmad

Hi , at one site the is abnormal sound from the actuators comparing to other actuators , note that these are installed on butterfly valves any one can knows the reason ? Ahmad

HI , its new valve , we can say 7 months what do you mean by 2 part or 3 parts ? its ball valve PN16 fluid : water , application : used in tanker filling station for the drinking purpose. what is the difference between Floating and trunnion ? the leake from the seats AHMAD

yes we installed the valves and after operation the seats are damaged ! the picture showing the body seat inside the valve . from your point of view this is reason of the damages ? Ahmad

Thx , Actually am a distributor and we purchase the valves from one factory and delivered to the site , all valves are inspected and we are sure about that, the damage of the seat is clear , attached some pictures do you think water hummer happened in the operation and damage the material ...

dears , we have one problem at one site , we are using ball valves DN80 , the contractor sent us back a report mention that most of the seats and balls are damaged !! the factory said that all valves are tested 100% before delivery , so what is the reason behind that ? Ahmad

Dears , What is the different between Hollow , rigid & telescope extension spindles for the valves applications ? Ahmad

thank you , but any more clarification regarding above points ? Ahmad

Hi , one of the client asked about double eccentric butterfly valves Duplex SS disk with some additional data and accessories as below , 1. Density value ( 1.5 kg/cubic m ) 2. shut of pressure ( 12 bar ) 3. Compressibility (0.09956 ) 4. Actuator stroke time ( 300mm per minute ) motor operated...