Recent content by KAR FUNG

Thanks Ussuri. I got the it. Thanks

Hi Sir, Do you have Ciria C662 Construction Work Sector Guidance for Designers, please share it to me. Thanks.

Hi Guys, What is the rebar slenderness ratio for all the rebar sizes for T10, T12, T16, T20, T25 and T32? Your reply is referred to which clause of the standard. Thanks.

Hi EireChch, What the reason to maintain for 12 hrs? Could it be shorter? Any code to cover this? Thanks.

Hi Sir As per practice, we will carry out maintained load test to verify the pile capacity before carrying out the full string on the working pile. During the maintained load test, the retention load for 200% is 24 hours. May I know, what is the reason to maintain the 200% load for 24 hours...

Dear Sir, Could you explain what is the reason for the wind pressure on building the design return period must be 50 years? Why cannot be 100years or 20 years? Thanks.

Dear All, Any one here can state the differential structure design using BS 8110 and BS 5400 ? Thanks.

Hi, How to solve the Etabs installation problem. Thankshttps://files.engineering.com/getfile.aspx?folder=538714db-b21c-429f-9773-05d83ef3fac6&file=etabs.jpg

Agent 66, Not agree with you. Please see European Technical Approval & BS8539. Thanks.

Dear All, What is the factor of safety in BS code for the connection design in steel structure for ultimate load? What is the clause? Thanks.

Dear Manitou90 This table is under which Eurocode ? Thanks

Dear Sir, What is the factor of safety for fasteners in BS code install at the structure?

Dear All, I need to add steel plate at the existing truss member to strengthening the truss in order to cater additional load. The new steel plate will be welded to the existing rectangular hollow section (RSH). The existing truss member is 2.5m in length. 60mm welding length only is required...

Dear All, I need to add steel plate at the existing truss member to strengthening the truss in order to cater additional load. The new steel plate will be welded to the existing rectangular hollow section (RSH). The existing truss member is 2.5m in length. 60mm welding length only is required...

HI Please share with me A-Frame scaffolding acad detail for design. Thanks.