Recent content by SORJM

Thanks a lot, Kneubaecker with your help I was able to create what I wanted.

Thanks once again. You did not mention the value of d. Is it a linear dimension.

Thanks Kneubaecker for the reply. As you know I am unable to open NX 12 file so could not understand the total process. I created perpendicular lines on the Rectangle end but how to create perpendicular lines at circle end.

I want to create above type of shape in Nx 11. To create this I have created two sketches. No guides are provided to do so. The cut should be normal to profiles. I am attaching the file where I have drwan everything but stuck at creating the above shape. Please help me in this regard...

Thanks a lot for the reply.

How can I create a hole of ANSI Unified Screw Threads of size 0.5 and ½-20 UNF designation using ‘Hole Tool’? Please Help.

Thanks for the reply. I think an another thread profile available in the mechanical engineering handbook will be more suitable because it has described internal and external in separate way. When I would complete it post it here... [glasses]

I wanted to create a bolt and nut on the basis of following thread profile available at wikipedia. I have a little bit of confusion so I though I should take help from experienced people present here. As I can understand from the following image for internal and external are same that would be...

Thanks for the reply.

I want to create following type of Hole in Nx but unable to do that please help me I have attached Nx part file. http://files.engineering.com/getfile.aspx?folder=36f68b36-9837-4258-8aec-a34c0593c858&file=Piston_Rod_Cap.prt

Thanks Toost that is nice I will be happy to get your assistance... In past your replies helped me a lot. You guidance for the community is quite appreciating.

Toost I am not comparing the strength of software. I work on different CAD application and teach people the working process of different CAD software. In creo that was not variational sweep as I shown in the video I was general sweep. When I created the same thing in solidworks it was more easy...

Please watch the following Youtube Video to know the specification of the Sweep created in the other software that I want to create in Nx...Any help will be appreciate..... Link https://youtu.be/LP_84puyQko

Thanks Toost for the reply I tried it but result is not up to mark......See the image. Any suggestion please.

One file was missing in the attachment so please see the newly attached files posted along this....http://files.engineering.com/getfile.aspx?folder=9d17ae69-227b-4dac-bb7c-ae8d4bc8114c&file=Drill_Chuck.rar