Thank you, I will inquire about the contents of the tank and get an exact answer. The problem is that the commercial staff in our company withholds important information from us, the technical staff. I also struggle with that.
According to ASME IX (or ASME B31.3) , (or AWS D1.6)
GTAW MANUAL.
is it possible to weld two 316L plate (150*75*3 mm ech) (6*3*0.11 inch) without groove preparation.
Your thoughts on:
- Root spacing
- Diameter of filler metal
- Amperage limits to reduce formation
Is it optimal to do a V...
THANK YOU all for your help.
It is actually a galva structure(a cabin) used for transporting a 1200L storange tank. About the loads, the mechanical engineer got that covered. It only needs PJP double V fillet welds according to the engineer.
My work is to design and write the preliminary WPS...
If I have two UPN200 to be welded, like in the photo,
Is it possible to use the weld all-around symbol without seperating each welding joint, can I take the part directly from the drawing, and use two UPN200 in design directly, In WPS according to ASME IX.
Is the joint in other photo, a butt...
Thank you for your rely.
My company does have an international welding engineer that they deal with. But he usually reviews the documents. That way it is cost-effective.
I look to bright side. I am training and learning at the same time. I am also a welder. This is only a plus.
Hello, I am an inspector apprentice.
Our new client supplied us with a detailed engineering drawing of storage tank 1200 L inox 316L and wants its fabrication to be according to ASME.
In the drawing we use
- A nozzle composed of pipe 1/2" and other elements
- A nozzle composed of pipe 1" and...
I am a inspector apprentice, please help me!
The client supplied our company with a detailed engineering design of a storage tank 1200 L inox 316L destinatined for alimentary production.General thinkness is 3mm and 5mm.
Does this job requires impact toughness test?
I am asking this with...
