Search results for query: *

Hi Everyone - I am looking for the best way to sketch/plot points/etc the following function: X = -.15/2 * COS(360 * 4 * Y) + .15/2 This curve will be attached to a profile that will be swept. I am looking for the smartest and best way to do this. I don't know how to apply this to a 'curve'...

Thanks I really appreciate the expert direction. Jim Weisner Senior Designer General Electric Company NX V12.0.1 MP02

Second pic here Jim Weisner Senior Designer General Electric Company NX V12.0.1 MP02https://files.engineering.com/getfile.aspx?folder=111e8ac3-5de6-49d5-b4ea-cd695833e913&file=IMAGE_2.png

I have attached 2 pictures. One shows my cross section and guide strings. The guide strings were created by intersecting 2 surfaces. When I do a 'Sweep Along Guide' the cross section rotates slightly by the end of the sweep. Is there something I can to to maintain that orientation of the cross...

Thanks cowski! That's perfect!! And I should have known this. [sad] Jim Weisner Senior Designer General Electric Company NX V12.0.1 MP02

Many years ago and several NX versions ago I used to be able to create a curve by intersecting 2 surfaces (if I remember correctly). Is this functionality still available to me? Thanks in Advance. Jim Weisner Senior Designer General Electric Company NX V12.0.1 MP02

We use Space Pilot Pro's here for NX work. Is there a way I can make it function with NX only?? I don't want to use it for anything else. If this has already been asked I apologize in advance. I could not find anything. Thanks ~ Jim Weisner Senior Designer General Electric Company

I've attached a pic of my session. I've been testing this to see if the orienting of the CSYS on the Datum Plane will change with different Datum Planes and different starting CSYS's. The Datum CSYS in the pic represents the Absolute CSYS. I haven't found anything changes it. No matter what I do...

I have datum planes in my model and I orient the WCS to the CSYS of the Object. I select a datum plane. What determines the direction of the X and Y axis? I am using NX V10. Thanks ~ Jim Weisner Senior Designer General Electric Company

Thanks. The problem is the ends of the arc are tied to datum planes that are located other ways. The arc goes along for the ride and fills in the space. Unfortunately it flips when it crosses above/below 180 degrees. Jim Weisner Senior Designer General Electric Company

I have an arc segment sketch that is extruded and given a thickness in a start part. The start arc is >180 degrees. When the start part is modified to make another part and the arc segment is to be <180 degrees, the sketch flips to give the >180 segment. If I want a 120 degree arc segment it...

I'm very new to Inventor and we are primarily using models and assemblies to make assembly videos of the parts. Is there a way to show the ID of each part as it is assembled? My apologies for being a newb but trying to learn. Thanks ~ Jim Jim Weisner Senior Designer General Electric Company

Is there a way to rotate PMI views in models by expression? I don't want to rotate the view every time I generate a new part. I want it to rotate itself by expression. I have an arc piece with a radial arm on it. The part is built as part of an assembly driven by sketches at the assembly level...

Attaching the other pic. Jim Weisner Senior Designer General Electric Companyhttp://files.engineering.com/getfile.aspx?folder=bad5e456-b64a-424a-9edf-ccd5096139bf&file=GREATER_THAN_180.JPG

We are trying to make a seed part with embedded PMI for designers to use here. It's a 'C' shaped part with an angular dimension. That angle can vary to just about any value. We will have several of these parts per job so the thought is to use Part Family functionality to create and control all...

Thanks Tim. I couldn't get that to work either. When I picked the sheet body edge I could not pick the datum plane and vice versa. The thought here is it won't do it because the intersection occurs 2 places: top and bottom and NX doesn't know how to resolve it. I don't think that's true because...

Platform NX 10.0.3.5 I am trying to create a Datum Axis at the intersection of a cylindrical sheet body and the datum plane intersecting it. Logically in my mind I see this but when I try to select features it won't allow me to do this. I try to create it on 'Inferred' and I can either select...

Thanks for responding. I attached another picture to show the origin of the datum plane. It is a bisector of 2 faces unrelated to the red datum plane. On a rather curious note, people have found here that if the rectangular groove feature is removed the deformable part functions fine. If...

I built an over length plumbing part that gets fit and trimmed at assembly. I put a datum plane in (the red one in the attached pic) and added a trim feature. The datum is offset from the YZ datum plane of my default datums. Then I do Define Deformable Part and use the datum offset location as...

Thanks! It worked like a charm!!