Sorry, I was a little unclear, DBezaire directed me to a site that has a scrip file but on my end it’s not downloading properly so my last question was directed towards that.
Is there anyway of doing this with out leaving the workbench I’m working in, example I four blocks stacked on top of each other in a stair step fashion and I want to save top most block as a step file and I also want the bottom right corner of that block to be the new local coordinate system is...
Hi All
Is there a way to export/save a file using a defined coordinate system let say I have a complete aircraft assembly and I want to export/save the tail section component relative to a predefined local coordinate system rather then in the aircraft system, how would you do this.
Thanks
Sorry you guys I was busy trying to get this to work with the suggestion given, and got tied up with something ells, but what I’m trying to do is, just image you have a 3.0 cylinder x 6.0 long in your left hand and from the top of this cylinder down lets say 2.0 you want to start your draft...
Hi all
How do you draft a wall from a given point, example: say you have cylinder that is 8.0 in dia. and 5.0 tall and I want to draft 1.0 from the top down of the cylinder wall tapering the wall inward. How do you do this using the [Taper] function with in [Feature Operation] tool bar?
Thanks
hi all
I am a new user to post builder and I choose, inch output 5-axis with dual rotary head and the Fanuc6m control, what are the step I need to take to output G93 inverse time feed rate when the A and B axis move simultaneously.
thanks for your help
Hi folks
In drafting when I switch between a 2D draw space to 3D using the display sheet icon in the drawing layout toolbar, if I put any kind of text in, using the annotation editor in a 3 dimensional draw space some where on a model that I have been working on, I’ll find that every time I...
HI EVERYONE
I am trying to use a 90deg head on a horizontal machine with the spindle of the angle head face the machine table, I notice that when creating tools in NX3 there are 3 new subtypes for all mill types CARRIER, POCKET, HEAD, does anyone know if the head subtype is used for right...
HI EVERYONE
I am trying to use a 90deg head on a horizontal machine with the spindle of the angle head face the machine table, I notice that when creating tools in NX3 there are 3 new subtypes for all mill types CARRIER, POCKET, HEAD, does anyone know if the head subtype is used for right...
Once I have regenerated the operation, and down at the bottom of the operation window there is a button that is called replay once I click it, on the screen I get bunch of center line data, want to be able to save that center line data as geometry on a certain layer so if I chose to I can use it...
Well I’d like to save the center line data on the screen so that if I ever have a situation where cutter is jumping up, or retracting I should say, I’d like to take the center line data and connect it, at it’s end points and just chain the whole thing and us an on condition, and drive the center...