Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Jonathan Lessard

    Bystronic 3015: OverCurrent and Tube Out NR Errors

    Thank you @krugtech my problem is solve one call away and point me to the issue... bad power supply to hv card. The call save my day Thank you
  2. Jonathan Lessard

    Bystronic 3015: OverCurrent and Tube Out NR Errors

    Couple of question here, where is the fastmix valve located and do someone have a trick to find leaks in vacuum system (soapy solution for example) Today I got the error message tube out nr. 12 and I don’t know where to start and where to check
  3. Jonathan Lessard

    Cut condition cutting steel with nitrogen

    picture of my issue and my parameter
  4. Jonathan Lessard

    Cut condition cutting steel with nitrogen

    Hi guys I need help when I cut mild steel with nitrogen I get a small drop on corner, I really don’t know on what setting should I play with, my hole are nice and straight head cut are good. Another thing it’s only happen with 14 gauge and 11 gauge Thank you
  5. Jonathan Lessard

    5 inch lens get foggy need help

    I spoke with @Krugtech I spotted the issue my optic temp on my chiller is to cold, the heater element in the chiller is bad. That’s create some condensation
  6. Jonathan Lessard

    5 inch lens get foggy need help

    Hi, I have a bystronic bystar 3015 with btl2800, after only 30 min of cutting stainless with nitrogen my lenses get foggy (to me it look almost like humidity or oil film). My shop is high on humidity, my compressor deliver dry air ( dryer with air conditioning unit and inline dryer). Anyone have...
  7. Jonathan Lessard

    Mirror replacement

    Hi guys I have a bystronic 3015 with btl 2800, I have change all the mirror except for 2, to me they look very intimidating The 2 (position #1 and #4)that I need to change are the end mirror and the output window. Do I need to know something before replacing them since there is a lot of...
  8. Jonathan Lessard

    Bystronic 3015 btl 2800 with cnc 90

    Also the battery that you where talking about is it that one The white and green one or there is another somewhere that I missed, this one was change and still get the same message cmos battery state low
  9. Jonathan Lessard

    Bystronic 3015 btl 2800 with cnc 90

    Actually I see my file on my USB key by hitting disk, but when it’s start to load it never end up in my cnc It’s reading plan but never able to load it and no error message even after 5 min When you say you need to tell it where to look for them, where I input that info? Is it in that screen...
  10. Jonathan Lessard

    Bystronic 3015 btl 2800 with cnc 90

    Hi guys I have an issue with my laser, everything was working fine, after a weekend, the computer start and I get the message cmos battery state low, it was doing it preveiously but I was going in the bios and exit without saving and everything was running normally. Know everything works, laser...

Part and Inventory Search