Can anybody please tell me which software is best to download in calculating chain tension and slack of the chain? Is there a rule of thumbs regarding maximum the chain will slack over time?
Steel that will be used is 350 grades. It will be both preheat and PWHT. I am looking into at full weld penetration as well. However, my major concern is the calculating of force and whether the 16mm thick plate will be able to handle to load and stress or the weld gives way.
I have looked up...
32 tooth triplex has a maximum 25 RPM. The sprocket will be driven by a triplex chain that hooks up to a 9 tooth sprocket which connects to a hydraulic motor that produces 2700 Nm torque. I have attached more dimensions to the drawing.
As for “Design of Welded Structures (Hardcover) by Omer...
I have to design a 32 tooth triplex 1.25 inch pitch with a plate insert instead of making it out of 1 piece because of cost purposes. To do so the insert will have to be fillet welded both sides of the plate, however, I have very little idea how thick the weld line should be and how much stress...
